ebay store    

1km RF Wireless Remote Control Radio Controller

Introduction:

it is embedded with advanced code matching and identification functionality and controled by MCU which guarantee no conflict between each other.

KST-RFKZQ8 is a kind of superheterodyne/superregenerative wireless receive/decode control panel which used with KST-RF008 together.

  Free Worldwide shipping by Registered Air Mail  (It also have Tracking Numbe for sending)(about 5-14days)

KST-RFKZQ8 technical parameters:
1. Working voltage: +12 VDC
2. Working Current: 30mA
3. Relay external load voltage :0~220V / AC / DC
4. Relay external load current :0~10A
5. Working frequency: 433.92MHz
6. Modulation: ASK
7. Receiver sensitivity: -100 ~ -110dbm
8. Operating temperature: -40 ℃ ~ +85 ℃

9. Usage:

A: code matching method for KST-RFKZQ8:
In order to ensure no interference with each other, the ID code for each KST-RF008 is unique, and therefore it is necessary to do the code matching before it can function properly.

1, power on receiver (KST-RFKZQ8);

2, press down the button LEARN and LED light is on, it indicates KST-RFKZQ8 is entering code matching state.

3, hit any key of KST-RF008 2 times (at first time, LED is off), LED flash 2 times means the code matching is successful and it exits from the state of the Code matching;

4, repeat step 2-3, you can complete the code matching proess with other devices of KST-RF008;
   the max number is 15.

5, in the course of the code matching, the unique KST-RF008 ID is stored in the EEPROM of the receiver, so when power down, the ID code will not be lost.

6, under code matching state, if not received the new code needs to match in 15 secs, it will automatically exit.

B: clear all IDs in KST-RFKZQ8:
1, power on receiver (KST-RKX010);

2, hold down the button LEARN for about 6sec unitl the LED flash 4 times, it indicates all the codes are removed; At this point you can release the button;
 
3, if need to  rematching, just repeate step 1,2,3,4 of A.

C: working mode

The mapping relationship between buttions and the output:

1, press Key 1,the common terminal connected with the control panel COM1 relayly-open contacts and dis-connected with the ly-closed contacts;
release Key 1, the common terminal connected with the control panel COM1 relayly-closed contacts and dis-connected with the ly-open contacts;

2, press Key 2,the common terminal connected with the control panel COM2 relayly-open contacts and dis-connected with the ly-closed contacts;
release Key 2, the common terminal connected with the control panel COM2 relayly-closed contacts and dis-connected with the ly-open contacts;

3, press Key 3,the common terminal connected with the control panel COM3 relayly-open contacts and dis-connected with the ly-closed contacts;
release Key 3, the common terminal connected with the control panel COM3 relayly-closed contacts and dis-connected with the ly-open contacts;

4, press Key 4,the common terminal connected with the control panel COM4 relayly-open contacts and dis-connected with the ly-closed contacts;
release Key 4, the common terminal connected with the control panel COM4 relayly-closed contacts and dis-connected with the ly-open contacts;

Note: This controller has two working modes: latching and non-latching mode, a jumper will be able to do the switch.

hello, this is ebay seller vpr2008 located in Shenzhen, China. Thanks for your purchasing our product, please leave me your positive evaluation on our product if convenient.  Thank you very much.